Sony HAP-Z1ES Guide De Référence page 8

Masquer les pouces Voir aussi pour HAP-Z1ES:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 10
Specifications
Playback Specifications
Frequency response
2 Hz - 80 kHz (–3 dB)
Dynamic range
105 dB or higher
THD
0.0015% or less
Network section
Wired LAN
1000BASE-T/100BASE-TX/10BASE-T
Wireless LAN
Compatible standards
IEEE 802.11 b/g/n
Frequency band/channel
2.4 GHz band: channels 1-13
HDD section
Capacity
1 TB*
* Some portions of the capacity are used for data management.
Therefore, the capacity a user can use is less than 1 TB.
Supported playback format
DSD (DSF, DSDIFF), LPCM (WAV, AIFF), FLAC, ALAC, ATRAC Advanced
Lossless, ATRAC, MP3, AAC, WMA (2 channels)
Jack section
Output jacks
LINE OUT UNBALANCED
Output level: 2.0 Vrms (50 kilohms), Impedance: 10 kilohms or
higher
LINE OUT BALANCED
Output level: 2.0 Vrms (50 kilohms), Impedance: 600 ohms or
higher
EXT port
Type A USB, Hi-Speed USB, for connecting an external hard disk drive
8
GB
IR REMOTE OUT jack
for connecting the monaural mini-plug cable (supplied) or IR blaster
(supplied)
General and others
Power requirements
AC 230 V 50/60 Hz
Power consumption
On: 35 W
During standby mode (when [Network Standby] is set to [Off]): 0.3 W
During standby mode (when [Network Standby] is set to [On] and a
wired LAN is used): 2.6 W
During standby mode (when [Network Standby] is set to [On] and a
wireless LAN is used): 2.8 W
Dimensions (approx.) (w/h/d)
430 mm × 130 mm × 390 mm
including projecting parts and controls
Mass (approx.)
14.5 kg
Supplied accessories
AC power cord (1)
Remote control (RM-ANU183) (1)
R03 (size-AAA) batteries (2)
LAN cable (1)
Monaural mini-plug cable (1)
Audio cord (1)
IR blaster (1)
Quick Start Guide (1)
Reference Guide (this manual) (1)
Design and specifications are subject to change without notice.

Publicité

Table des Matières
loading

Table des Matières