Safety Definitions; General Safety Instructions; Product Liability; Safety - Husqvarna 580BTS Mark III Manuel D'utilisation

DISPL Displacement
ECS Emission control system HRS
Exhaust emission control system:
ECM Engine control
module (Auto-
tune)
EM Engine modifica-
tion
Evaporative emission control systems:
C Coextruded (Mul-
tilayer)
N Nylon

Safety definitions

Warnings, cautions and notes are used to point out
specially important parts of the manual.
WARNING:
injury or death for the operator or bystanders
if the instructions in the manual are not
obeyed.
CAUTION:
damage to the product, other materials or
the adjacent area if the instructions in the
manual are not obeyed.
Note:
Used to give more information that is necessary
in a given situation.

General safety instructions

WARNING:
instructions that follow before you use the
product.
• Under no circumstances may the design of the
product be modified without the permission of the
manufacturer. Always use genuine accessories.
Non-authorized modifications and/or accessories
1667 - 002 - 19.04.2021
EMISSION CONTROL LABEL ABBREVIATIONS
EVAP
OC Oxidizing Cata-
lyst
TWC Three way cata-
lyst
P Treated HDPE or
PE
S Sealed
Used if there is a risk of
Used if there is a risk of
Read the warning
General:
Evaporative
Hours

Product liability

As referred to in the product liability laws, we are not
liable for damages that our product causes if:
• the product is incorrectly repaired.
• the product is repaired with parts that are not from
the manufacturer or not approved by the
manufacturer.
• the product has an accessory that is not from the
manufacturer or not approved by the manufacturer.
• the product is not repaired at an approved service
center or by an approved authority.

Safety

can result in serious personal injury or the death of
the operator or others.
• Never use a product that has been modified in any
way from its original specification.
• Never use a product that is faulty. Carry out the
safety checks, maintenance and service instructions
described in this manual. Some maintenance and
service measures must be carried out by trained and
qualified specialists. Refer to
on page 15 for instructions.
• All servicing and repair work on the product requires
special training. This is especially true of the safety
equipment. Never use a product with faulty safety
equipment. If your product fails any of the checks
described in this operator's manual you must contact
your service agent. The safety equipment of the
product must be maintained as described in this
operator's manual. When you buy any of our
products we guarantee the availability of
professional repairs and service. If the retailer who
sells your product is not a servicing dealer, ask him
for the address of your nearest service agent.

Safety instructions for operation

WARNING:
instructions that follow before you use the
product.
• This product is a dangerous tool if used carelessly or
incorrectly and can cause serious, even fatal injuries.
SORE Small off road engines
US EPA United States Environ-
mental Protection Agen-
cy
Maintenance schedule
Read the warning
5