LGB 51070 Instructions De Service page 9

USA GB
51070
Analog Throttle, Indoor, 5 Amp
THE PRODUCT
This advanced control offers
modern microprocessor technolo-
gy for sensitive throttle control
and a smooth voltage output spe-
cifically designed for your LGB
locomotives. Features include:
- 5 amp control (maximum)
- built-in AC/DC conversion for
use with all LGB transformers
(AC and DC)
- dual-range throttle knob ("Cen-
ter Off" and "Left Off")
- Boost button with programmable
acceleration
- Stop/Halt button
grammable braking
- LED indicators
- Connectors for wires up to
1.5 mm 2 cross-section
- short circuit protection
- optional wireless operation
- specifications:
base dimensions: 160 x 120 mm
(6.3 x 4.7 in)
input voltage: 18 V AC or up to
24 V DC
output voltage: 0 - 24 V DC
output current: 5 amps (max.)
THE PROGRAM
With this model, we recommend
the following items:
- 50110 AC Transformer, 5 Amp,
18 Volt, 230 Volt
- 50111 AC Transformer, 5 Amp,
18 Volt, 110 Volt
- 55016 Loco Remote
- 55050 Wireless Transmitter
- 55051 Wireless Transmitter,
USA
- 55055 Wireless Receiver
- 55056 Wireless Receiver, USA
For information on the complete
LGB program, see the LGB cata-
log.
INSTALLATION
Caution! This product is not wea-
ther-resistant. Protect this product
from moisture.
Caution! Use wires with a cross
section of at least 0,5 mm
(approx. 20 AWG) (e.g., LGB
50160) to connect this throttle.
- Connect terminals 1 and 2 on
- Connect terminals 3 and 4 to an
- You can use the 51070 with all
with pro-
Wireless Control
Connect the 55055/55056 Wire-
less Receiver to the socket on the
throttle. See the instructions for
the 55055/55056 Wireless Recei-
ver for more information.
OPERATION
The green LED illuminates to
show that the throttle is connec-
ted to a working transformer.
Direction of travel and speed
The 51070 throttle features two
ranges for the throttle knob: "Cen-
ter Off" (traditional LGB style) and
"Left Off" (for more precise thrott-
le control). You can select the
range during operations. Turn the
throttle knob to the new "Off" posi-
tion (center or left) to activate the
new mode:
"Center-Off" mode
- Slide the switch at the top of the
"Left-Off" mode
- Slide the switch at the top of the
the back of the throttle to the
tracks of your layout (Fig. 1).
LGB transformer.
LGB transformers (AC or DC).
We recommend the 5 Amp
50110/50111 AC Transformer,
which allows you to use the full
potential of the 51070. You can
use a transformer with an output
of less than 5 amps (e.g.,
50080/50081 DC Power Pack, 1
Amp), but the track current is
limited to the output of the trans-
former. You can use a transfor-
mer with an output of more than
5 amps (e.g., 50100/50101
JUMBO Power Pack), but the
maximum output of the throttle
is limited to 5 amps.
throttle to the left. If you turn the
throttle knob to the right or left,
the loco will move forward. If you
turn the knob to the other direc-
tion, the loco will move back-
ward.
throttle to the right. Now the ent-
ire range of the throttle knob is
available for precision control of
your locomotives. Turn the thrott-
2
9