General Information - WIKA PGS23.100 Mode D'emploi

1. General information

1. General information
The pressure gauge described in the operating instructions has been
■
designed and manufactured using state-of-the-art technology.
GB
All components are subject to stringent quality and environmental
criteria during production. Our management systems are certified to
ISO 9001 and ISO 14001.
These operating instructions contain important information on
■
handling the pressure gauge. Working safely requires that all safety
instructions and work instructions are observed.
Observe the relevant local accident prevention regulations and
■
general safety regulations for the pressure gauge's range of use.
The operating instructions are part of the product and must be kept
■
in the immediate vicinity of the pressure gauge and readily accessi-
ble to skilled personnel at any time.
Skilled personnel must have carefully read and understood the
■
operating instructions prior to beginning any work.
The manufacturer's liability is void in the case of any damage caused
■
by using the product contrary to its intended use, non-compliance
with these operating instructions, assignment of insufficiently quali-
fied skilled personnel or unauthorised modifications to the pressure
gauge.
The general terms and conditions contained in the sales documenta-
■
tion shall apply.
Subject to technical modifications.
■
Further information:
■
- Internet address:
- Application consultant:
4
WIKA operating instructions pressure gauge model PGS with reed contacts
www.wika.de / www.wika.com
Tel.: (+49) 9372/132-0
Fax: (+49) 9372/132-406
E-Mail: info@wika.de