General Information - WIKA 831 Mode D'emploi

1. General information

1. General information
The inductive contacts described in the operating instructions have been
■
designed and manufactured using state-of-the-art technology.
GB
All components are subject to stringent quality and environmental criteria
during production. Our management systems are certified to ISO 9001 and
ISO 14001.
These operating instructions contain important information on handling the
■
inductive contacts. Working safely requires that all safety instructions and work
instructions are observed.
Observe the relevant local accident prevention regulations and general safety
■
regulations for the inductive contacts' range of use.
The operating instructions are part of the product and must be kept in the im-
■
mediate vicinity of the instruments with inductive contacts and readily acces-
sible to qualified personnel at any time.
Skilled personnel must have carefully read and understood the operating
■
instructions, prior to beginning any work.
The manufacturer's liability is void in the case of any damage caused by
■
using the product contrary to its intended use, non-compliance with these
operating instructions, assignment of insufficiently qualified skilled personnel
or unauthorised modifications to the inductive contact.
The general terms and conditions, contained in the sales documentation, shall
■
apply.
Subject to technical modifications.
■
Further information:
■
- Internet address:
- Relevant data sheet:
4
www.wika.de / www.wika.com
AC 08.01
WIKA operating instructions inductive contact model 831