Maintenance; Maintenance And Cleaning; Warranty - Haussmann PT100321 Manuel De L'utilisateur

MAINTENANCE

WARNING! Always ensure that the tool is switched off and the plug is removed
!
from the power source before making any adjustments or performing maintenance
procedures.

Maintenance and Cleaning

Before any work on the tool, ensure it is unplugged from the power source.
For safe and proper working, always keep the tool and ventilation slots clean.
Regularly check to see if any dust or foreign material has entered the slots near
the motor and around the on/off switch. Use a soft brush to remove any
accumulated dust. Wear safety glasses to protect your eyes while cleaning.
If the body of the tool needs cleaning, wipe it with a soft damp cloth. A mild detergent
can be used but nothing containing alcohol, petrol or other harsh cleaning agent.
Never use caustic agents to clean plastic parts.
Lubricate all moving parts at regular intervals.
!
WARNING! Water must never come into contact with the tool.

WARRANTY

Thank you for investing in a HAUSSMANN power tool. These products have been
made to demanding, high-quality standards and are guaranteed for domestic use
against manufacturing faults for a period of 36 months from the date of purchase.
This guarantee does not affect your statutory rights. In case of any malfunction of
your tool (failure, missing part, etc.), please contact one of our service technicians
at our toll free service line at 1-866-206-0888 from 8 AM to 6 PM, Monday to
Friday, Eastern time. RONA reserves the right to repair or replace the defective
tool, at its discretion.
Normal wear and tear, including accessory wear, is not covered under guarantee.
The product is guaranteed for 36 months if used for normal trade purposes. Any
guarantee is invalid if the product has been overloaded or subject to neglect,
improper use or an attempted repair other than by an authorized agent.
Heavy-duty, daily professional or hire usage are not guaranteed. Due to
continuous product improvement, we reserve the right to change the product
specification without prior notice.
23