Technical Data - Haussmann PT100321 Manuel De L'utilisateur

TECHNICAL DATA

RONA code
2 Gears Impact Drill
Voltage rating
Current rating
No-load speed
Impact frequency
Max. drilling capacity
Chuck capacity
ASSEMBLY
WARNING ! Always ensure that the impact drill is switched off and the plug is
removed from the power source before making any adjustments or performing
maintenance procedures.
1. Auxiliary Handle
Using the auxiliary handle when operating the drill provides more control and
a low fatigue working posture. To adjust the auxiliary handle position, turn it in
a counter-clockwise direction, rotate it to the desired position and lock it in
place by turning it clockwise (8).
2. Adjusting the Drilling Depth
The required drilling depth can be set with the depth gauge (6).
To adjust the depth gauge (6), loosen the auxiliary handle (8).
Pull out the depth gauge until the distance between the tip of the drill bit and the
tip of the depth stop corresponds with the desired drilling depth.
Tighten the auxiliary handle before starting to work.
Changing the Bit
WARNING.
Always be sure that the tool is switched off and the plug is removed from
power source before carrying out any work on the tool.
20
59595065
PT100321
120V AC / 60 Hz
8A
0-1450 / 0-3400 RPM
0 - 54400 RPM
Wood 1-3/16" (30 mm)
Concrete 5/8" (16 mm)
Steel 1/2" (13 mm)
1/2" (13 mm)
!
!