Lincoln Quicklub V10-V13 Instructions De Service page 36

Subject to modifications
1A1.01: Socket with cable, 3-core for power supply 24 VDC
2A1.01: Socket to connect the illuminated pushbutton (for additional lubrication and functional test) and the signal lamp in case of low-level indication
15 - Battery + 24 VDC via driving switch
30 - bridged with 15
31 - Battery – 0 VDC
M - Electric motor
A - Control p.c.b. V10-V13
B - Pump housing
C - Connection plug 1A1.01 at pump housing
D - Socket X1
F - Driving switch
Connection X1: Square-type plug DIN 43650 (left) 1A1.01
G - Fuse 10 A
H - External illuminated pushbutton
K - Connection plug 2A1.01 at the pump housing
L - Socket X3
N - Level control
O - external signal lamp in case of low-level indication
P - Battery cut-off
Z - Operational test / additional lubrication
Connection X3: Square-type plug DIN 43650 (right) 2A1.01
br - brown gb - yellow
sw - black ws - white
rt - red bl - blue
gr - grey
IMPORTANT
Do not connect the socket D with
contact 30, since the control
p.c.b. is connected internally
6001a02
between 15 and 30.
T-PCBvw-050b08