Connecting The Receiver To A Tv Or A Monitor; Function And Use Of The Kit; Connecting The Cameras - Extel WESV 82600 Guide D'installation Et D'utilisation

c. Connecting the receiver to a TV or a monitor
2
1
Do not use the USB
cable for this type
Audio Video
of connection.
In case of a band quality image, check that the format of the video signal selected is compa-
tible with your screen.
1. The appliances turned off
2. Connect the two appliances with the supplied RCA/Jack cord
3. Connect the mini jack cable at the back of the receiver to the AV output and the RCA
yellow (video) and white (audio) terminal ends. (See picture below)
4. Connect the cord of the 5VDC adaptor to the "power supply" plug of the receiver.
5. Plug the adaptor into a 230 VAC mains socket: the light indicator turns on green.
6. Turn on the monitor
6

FUNCTION AND USE OF THE KIT

a. Commissioning
Press the key ON/OFF (use this same key to turn the receiver off).
b. Connecting the cameras
1- Connect the cord of the 5VDC adaptor to the "Power supply" input of the camera.
2- Plug the adaptor into a mains socket.
10GB CFI EXTEL WESV 82600 - 06/2009 - V1