Changing The Temperature Unit; Battery Display - Auriol AFT 77 A1 Mode D'emploi

♦ Press the
symbol is shown and the lowest measured
temperature for indoors and outdoors is
displayed .
♦ Press the
current indoor and outdoor temperatures .
♦ Press and hold the
around 3 seconds while the maximum or
minimum value is being displayed to delete
the saved values .

Changing the temperature unit

On delivery, the temperature unit is preset to
degrees Celsius ( ) .
♦ In basic mode, press the
switch between the temperature units
( or

Battery display

If the battery symbol is shown on the indoor
temperature panel 2, the batteries in the tem-
perature station should be replaced as soon as
possible (see also the section Operating the
temperature station) .
If the battery symbol is shown on the outdoor
temperature panel 4, the batteries in the
outdoor sensor should be replaced as soon
as possible (see also section Operating the
outdoor sensor) .
AFT 77 A1
button 8 twice: the
button 8 again to show the
) .
button 8 for
button 9 to
GB │ IE │ NI │
■
21