Setting Up; Requirements For The Set-Up Location; Operating The Outdoor Sensor - Auriol AFT 77 A1 Mode D'emploi

Setting up

Requirements for the set-up location

CAUTION
► When selecting the installation location,
ensure that the appliances are not sub-
jected to direct sunlight, vibration, dust,
heat, cold and moisture .
► Do not set the appliance up in the vicinity
of heat sources such as radiators .
► Fit the outdoor sensor at a maximum
distance of 30 m from the temperature
station . Ensure that there are no disruptive
obstacles between the outdoor sensor
and the temperature station . Otherwise,
transmission can be disrupted .
♦ Both the temperature station and the
outdoor sensor can be suspended from
a screw using the hangers 7 and t .
♦ Alternatively, you can fold out the stand w
of the temperature station to set it up on an
even, horizontal surface .

Operating the outdoor sensor

♦ Open the battery compartment i on the
rear of the appliance by pushing the bat-
tery compartment cover o in the direction
of the arrow .
♦ Insert two type AA batteries into the appli-
ance's battery compartment i as shown .
AFT 77 A1
GB │ IE │ NI │
■
9