Auriol AFT 77 A1 Mode D'emploi page 15

NOTE
It is possible that no signal can be received
due to the surrounding buildings or because
the distance is too great .
If you are unable to establish an automatic
connection to the outdoor sensor, you can
do this manually:
♦ Press and hold the
the reception signal
outdoor temperature panel 4 .
The temperature station automatically starts to
receive the DCF signal after 3 minutes, irre-
spective of whether the outdoor sensor recep-
tion search has been successful or not .
The reception symbol
panel 1 . If the DCF signal is being received
correctly, the current central European Time
(CET) is displayed on the time panel 1 and
the date and weekday are displayed on the
date panel 3 . In addition, the reception
symbol
time panel 1 .
If the appliance is unable to synchronise with
the DCF signal, you can also set the time
manually (see section Basic settings) or you
can attempt the reception again .
♦ Press and hold the
3 seconds to attempt the reception search
again . The reception symbol
the time panel 1 .
AFT 77 A1
is permanently displayed on the
button 0 until
flashes on the
flashes on the time
button 9 for about
GB │ IE │ NI
flashes on
│
■
11