Important Safety Reminders; Using Your Cleaner - Hoover Pure power Green-ray TGP 1410 Mode D'emploi

IMPORTANT SAFETY REMINDERS

This cleaner should only be used for domestic cleaning, as described in this user guide.
Please ensure that this guide is fully understood before operating the appliance. Use only
attachments recommended or supplied by Hoover.
WARNING: Electricity can be extremely dangerous. This appliance is double insulated and
must not be earthed. This plug is fitted with a 13 amp fuse (UK only).
IMPORTANT: The wires in the mains power lead are coloured in accordance with the
following code:
Blue – Neutral Brown – Live
STATIC ELECTRICITY: Some carpets can cause a small build up of static electricity. Any
static discharge is not hazardous to health.
AFTER USE: Switch the cleaner off and remove the plug from the electricity supply.
Always switch off and remove the plug before cleaning the appliance or attempting any
maintenance task.
SAFETY WITH CHILDREN, ELDERLY OR THE INFIRM: Do not let children play with
the appliance or its controls. Please supervise the use of the appliance by older children,
the elderly or the infirm.
HOOVER SERVICE: To ensure the continued safe and efficient operation of this appliance
we recommend that any servicing or repairs are only carried out by an authorised Hoover
service engineer.
IT IS IMPORTANT THAT YOU DO NOT:
• Position the cleaner above you when cleaning the stairs.
• Use your cleaner out of doors or on any wet surface or for wet pick up.
• Pick up hard or sharp objects, matches, hot ashes, cigarette ends or other similar items.
• Spray with or pick up flammable liquids, cleaning fluids, aerosols or their vapours
as this may cause risk of fire / explosion.
• Run over the power cord when using your cleaner or remove the plug by pulling
on the power cord.
• Stand on or wrap the power cord around arms or legs when using the cleaner.
• Use the appliance to clean people or animals.
• Continue to use your cleaner if it appears to be faulty. If the power cord is damaged
stop using the cleaner IMMEDIATELY. To avoid a safety hazard, an authorised
Hoover service engineer must replace the power cord.
•
(*Certain models only)
PurePower IM 17 languages greenray .indd 1
GETTING TO KNOW YOUR CLEANER
A. Main Cleaner
B. On/Off Button
C. Cord Rewind Button
D. Power Control
E. Bag Check Indicator
F. Bag Door Release Button
G. Bag Door
H. Handle
I. Handle release
J. Suction regulator
K. Telescopic Tube
ASSEMBLING YOUR CLEANER
Remove all components from the packaging.
1. Connect the hose to the cleaner main body, ensuring it clips and locks into position.
To release: simply press the two buttons on the hose end and pull [2].
2. Connect the accessory set to the tube. Connect the tube upper end to the handle. [3].
3. Connect the tube lower end to the carpet and floor nozzle, ensure it clips and locks
[4].

USING YOUR CLEANER

1. Extract power cord and plug it into the power supply. Do not pull the cord beyond the
red marker [5].
2. Adjust the length of the telescopic tube by moving the telescopic release button up
and raise or lower the handle to the most comfortable cleaning position [6].
3. Carpet & Floor Nozzle. Press the pedal on the nozzle [7] to select the ideal cleaning
mode for the floor type.
Hard Floor: The brushes are lowered to protect the floor
Carpet: With lifted brushes for the deepest clean
Switch the cleaner on by pressing the On/Off Button on the cleaner main body [8].
4.
Adjust the power control regulator to the desired level. [9].
5.
6. Switch off at the end of use by pressing the On/Off Button. Unplug and press the cord
rewind button to wind the power cord back into the cleaner [10].
7. Parking and Storage - The tube can be parked for temporary storage while in use
[11], or in the storage position when not in use [12].
1
L. Telescopic Tube Release
M. Hose
N. Carpet and Floor Nozzle
O. Carpet and Floor Nozzle Release
P. Carpet Care Control Selector
Q. Accessory set
R. Pre-motor filter
S. Bag
T. Parquet Nozzle*
U. Pet Hair Remover Mini Turbo Nozzle*
V. Allergen Remover Mini Turbo Nozzle*
W. Grand Turbo Nozzle*
25/01/2011 08:35:03
GB