If the light ON time is inadequate due to the
weather, recharge or replace the batteries
using an external charging device or replace
these (refer to „Charging batteries").
Cleaning and Care
Before cleaning, switch the solar-powered
wall light off.
Troubleshooting
Problem
The light does not
switch on.
The light flickers.
10
Cause
Switch
set to "OFF" position
11
Dirty sensor
7
Rechargeable batteries
drained
Batteries are almost drained
Use a slightly dampened, lint-free cloth and
mild cleaning agent to clean.
Regularly check the sensor
cell
particularly for dirt.
6
Regularly clean the sensor and solar cell to
ensure proper functionality.
Keep the solar cell free of snow and ice,
especially in winter.
Solution
Set ON / OFF switch to "ON" position
Clean sensor
are
Charge batteries using an external
10
charging device
Charge batteries using an external
charging device
and solar
7
GB/IE
11