Power-Off Memory Function - Haier HWS77GDAU1 Manuel D'utilisation

Use
Notice
Influences on temperatures
The temperature inside the appliance is influenced by the following factors:
Ambient temperature
Frequency of door opening
The default setting is 12°C
When display stops flashing, it goes back to showing the current temperature
inside the wine cellar. It will take some time to reach the set temperature.
9. °C/°F function
Press the
10. Power-Off Memory function
If a power outage, the cellar will automatically save the set temperature. After
power recovery, it will run based on the temperature set before the power outage .
11. Low temperature compensation function
The wine cellar has a low temperature compensation function to ensure the stability of
the temperature: When the ambient temperature is lower than the set temperature, the
wine cellar automatically starts the low temperature compensation function, heating the
application.When the temperature in the application reaches the set temperature, the
12. Door opening alarm
If the door is kept open for over 1 min, buzzer will be beeping to give an alarm
till the door is closed or any key on display panel can be operated and then the
buzzer will stop beeping.
13. Humidity display
Hold the "
humidity. Press the "+" or "-" buttons to turn off humidity display.
Notice
The humidity of cabinet is tested in accordance with the European standard EN 62552,
the test resultat of humidity of cabinet is 50%-70% which is in line with EN 62552 and
(EU ) 2010/1060 requirements.
20
button, switch between Fahrenheit and Celsius.
"button for 3seconds, the display panel will appear the percentage of
Amount of stored bottles
The location of the appliance
EN