VOX Amplification Lil' Looper Manuel D'utilisation page 18

VOX Lil' Looper Owner's manual
Using the metronome as a guide while you record
You can use the metronome as a guide while you
record a loop. Adjust the following settings before
you start recording.
1.
Press the TAP button several times to specify the
tempo.
The metronome will sound at the tempo you specified.
The METRONOME button will light up red.
The TAP button will blink at the tempo you
specified.
2.
To adjust the volume of the metronome, hold
down the METRONOME button and turn the
LOOP LEVEL/VALUE knob.
3.
To specify the time signature, hold down the TAP
button and turn the LOOP LEVEL/VALUE knob.
The time signature is set to 4/4 when the power is
turned on.
The range of time signatures is 1/4 , 3/4, 4/4, 5/4, and 7/4.
18
You can't change the denominator of the time signature.
You can't change the time signature or tempo after
recording.
About the metronome operation
The functionality of the metronome may vary
depending on the record/playback mode. ()p. 21 "The
recording/playback function of the Lil' Looper")
When the record/playback function is in Sync mode
The metronome will run in sync with the loop when
recording and the metronome are on. Even if a loop is
stopped, the metronome will continue to run internally
in sync with the loop. As a result, the metronome will
synchronize with the loop the next time playback is
initiated. If the loop is deleted, the synchronization
will be canceled.
When the record/playback function is in Individual
mode
In Individual mode, the metronome will stop if the
loop is stopped. If a loop starts to record or playback,
the metronome will run from the first beat.