VOX Amplification Lil' Looper Manuel D'utilisation page 16

VOX Lil' Looper Owner's manual
If the PLAY status LED is lit-up green, a phrase has
been recorded in that loop, and the phrase is playing;
press the Loop pedal twice to stop.
If a REC status LED lights up red, that loop is
currently recording.
Press the LOOP pedal once to enter the playback
mode, and press it twice to stop the loop.
If the REC status LED lights up red and the PLAY
status LED lights up green, the overdubbing
function is being performed.
Press the LOOP pedal two times to stop the loop.
) p. 25 "Loop status"
) p. 24 "Erasing a loop-recorded phrase"
2.
Select the effect with the EFFECT button and
EFFECT knob.
Set the effect type with
the EFFECT button. The
type will be indicated by
the color that the button
lights up.
Red: Pedal effect
Green: Modulation/Delay effect
Orange: Simulation effect
16
Does not light up: Effect is off
Select an effect with the EFFECT knob and set the
first parameter.
The effect will be switched according to the position
of the knob.
Four effects are available for each effect type.
Pedal effect: COMP, CRUNCH, OVERDRIVE,
DISTORTION
Modulation/Delay effect: CHORUS, PHASER,
STUTTER, DELAY
Simulation effect: ACOUSTIC, BASS, RADIO,
PITCH
Also, as you turn the knob, the effect will change
while switching to the next effect.
) p. 26 "About the effects"