Resetting The Microprocessor; Preparing The Remote Control - Pioneer FH-S700BS Mode D'emploi

Indication Description
BASS Appears when [HI]/[LOW] is selected in [D.BASS] (page 37).
Appears when random/shuffle play is set (except when BT AUDIO is
selected as the source).
Appears when repeat play is set (except when BT AUDIO is selected as the
source).
Appears when a Bluetooth connection is made (page 15).

Resetting the microprocessor

The microprocessor must be reset in the following situations:
– Before using this unit for the first time after installation
– If the unit fails to operate properly
– When strange or incorrect messages appear on the display
1
Press the RESET button with a pen tip or other pointed instrument.

Preparing the remote control

Remove the insulation sheet before use.
RESET button
- 8 -