Care And Cleaning - Zanussi ZDT 13011 Notice D'utilisation

4. Close the appliance door. The programme
starts.
Starting a programme with delay start
1. Set the programme.
2. Press the delay button to delay the start of
the programme of 3 hours. The delay indi-
cator comes on.
3. Close the appliance door. The countdown
starts.
• When the countdown is completed, the
programme starts.
Opening the door while the appliance
operates
If you open the door, the appliance stops.
When you close the door, the appliance contin-
ues from the point of interruption.
Cancelling the delay start while the
countdown operates
1. Open the appliance door.
2. Press the delay button, the delay indicator
goes off.
3. Close the appliance door. The programme
starts.
Cancelling the programme
1. Open the appliance door.

Care and cleaning

Warning! Before maintenance, deactivate
the appliance and disconnect the mains
plug from the mains socket.
Dirty filters and clogged spray arms de-
crease the washing results.
Make a check regularly and, if necessary, clean
them.
www.zanussi.com
2. Press and hold the programme button until
the indicator of the set programme goes off
and the end indicator flashes.
Make sure that there is detergent in the
detergent dispenser before you start a
new programme.
At the end of the programme
When the programme is completed, an inter-
mittent acoustic signal operates and the end in-
dicator comes on.
1. Press the on/off button to deactivate the
appliance.
2. Close the water tap.
• Let the dishes become cold before you
remove them from the appliance. Hot
dishes can be easily damaged.
• First remove the items from the lower
basket, then from the upper basket.
• There can be water on the sides and on
the door of the appliance. Stainless
steel becomes cool more quickly than
the dishes.
Cleaning the filters
1
C
B
A
2
23