Identifying Parts And Controls - Sony SDM-N50PS Mode D'emploi

Identifying parts and controls

See the pages in parentheses for further details.
LCD display
Front
Rear/Side
6
1 1 (Power) switch and indicator (pages 9, 17, 21)
1
1 1
2 MENU button (page 13) 2
2 2
3 6 (contrast) button (page 13)
3
3 3
4 8 (brightness) button (page 13)
4
4 4
5 2 (volume) +/– and M(+)/m(–) buttons
5
5 5
MENU
6 6 INPUT and OK button, and indicator (pages 11, 13)
6 6
INPUT
1
2
OK
7 SYSTEM CONNECTOR (page 8) 7
7 7
8 Headphones jack (page 10) 8 8 8
9 9 9 Cable holder 9
0 Security Lock Hole ( ) 0 0 0
qa Display stand qa qa qa
This switch turns the display on and off.
The indicator lights up in green when the monitor is turned on.
The indicator lights up in orange when the monitor is in power
saving mode.
This button displays the main menu.
This button displays the CONTRAST menu.
This button displays the BRITGHTNESS menu.
(pages 10, 13)
These buttons display the VOLUME menu and function as
the M(+)/m(–) buttons when selecting the menu items and
making adjustments.
This button selects the INPUT 1 or INPUT 2 video input
signal. The input signal and corresponding input indicator
change each time you press this button.
This button also functions as the OK button when displaying
the menu on the screen.
This connector inputs signals from the media engine when the
display and the media engine are connected with a system
connecting cable.
This jack outputs audio signals to the headphones.
This holder is used to keep the system connecting cable out of
the way.
The security lock hole should be applied with the Kensington
Micro Saver Security System.
Micro Saver Security System is a trademark of Kensington.
This stand is used to install the display.