Setting - Becker Centronic SensorControl SC43 Notice De Montage Et D'utilisation

Assembly and Operating Instructions
HOLIDAY SETTING, LIGHT SENSOR SETTING (Holiday OFF/ON, Sun/Twi-
light)
Operting mode
MENUE
MAIN MENU

SETTING

1.. Press.the.MENU.button.
.. To.select.the.SETTING.menu,.press.the.+.button.until.SETTING.appears.
3.. Press.OK.to.confirm.
4.. HOLIDAY.ON./.OFF.appears.
5.. Confirm.your.setting.by.pressing.OK.
Note
This dialog box will only be displayed if a light sensor is connected to
the device.
6.. You.have.confirmed.the.HOLIDAY.function..SUN.will.appear..
7.. The.value.set.is.displayed..
8.. The.sunlight.setting.can.be.changed.by.pressing.the.+/- button.
. (The.two.digits.on.the.left.of.the.display.show.the.current.light.setting)
9.. Confirm.your.entry.by.pressing.OK.
. To.set.the.TWILIGHT.CONTROL,.follow.the.same.procedure.as.for.SUN.
10.. Press.the.MENU.button.twice.to.return.to.the.operating.mode.
14
Setting
HOLIDAY OFF
HOLIDAY ON
LIGHT
SENSOR
AVAILABLE ?
SUN
TWILIGHT
Press MENU
button 2 x