Perel SCAMSET8N Mode D'emploi page 4

5. Installation
Install the wifi antenna inside the house for the best results.
Please ensure a good wifi signal before installing! Relocate the router or the antenna if
necessary. If the wifi signal is still weak, add a wifi repeater or use a network cable.
Make sure to insert the SD card.
Step 1 Drill a hole for the wires to go through the wall. Loosen the screw at the bottom of the door
phone with the hex screwdriver. Remove the rain cover and stick the rain cover on the wall.
Step 2 Secure the rain cover using two screws.
Step 3 Lead the wires through the hole in the wall. Install the door phone in the rain cover and secure
with the hex screw.
Step 4 Connect the antenna to the door phone and stick the antenna on the wall.
Step 5 Proceed with the connection.
V. 02 – 26/06/2020
SCAMSET8N
4 ©Velleman nv