Whirlpool WOS97ES0ES Instructions D'installation page 9

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Cutout Height is Between 26
(68.4 cm and 70.3 cm)
1. Using 2 or more people, place the oven on its back
on a covered surface.
2. Remove the foot from the right front spacer by removing
the #8-18 x ³⁄
" screw.
8
NOTE: Do not remove the spacer.
A. Spacer
B. Foot
C. #8-18 x
3. In the same manner, remove the feet on the right rear,
left front, and left rear of the oven.
4. Using 2 or more people, place the oven in its upright
position.
5. Go to the "Make Electrical Connection" section.
" and 27
"
15
11
16
16
³⁄
" screw
8
Cutout Height is Between 28
(72.8 cm and 74.8 cm)
1. Using 2 or more people, place the oven on its back
on a covered surface.
2. Remove the foot from the right front spacer by removing
the #8-18 x ³⁄
" screw.
8
NOTE: Do not remove the spacer.
A. Spacer
B. Foot
C. #8-18 x
3. Rotate the foot 90° so the short side of the foot is positioned
toward the top of the oven.
4. Reinstall the foot to the spacer using the #8-18 x ³⁄
previously removed.
5. In the same manner, remove, rotate, and reinstall the feet
on the right rear, left front, and left rear of the oven.
" and 29
"
11
7
16
16
³⁄
" screw
8
" screw
8
9

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Wod97es0es

Table des Matières