schmalz VS-VP1-W-D NPN K 3C-D Manuel D'utilisation Simplifié page 12

This device has been designed, developed and constructed solely for industrial and com-
mercial use. Private use is excluded.
The Vacuum/pressure switch is built in accordance with the latest standards of technology
and is shipped in safe condition. However, hazards can arise during use.
Intended use includes the observance of the technical data and the installation and oper-
ating instructions in this manual.
3 Design of vacuum/pressure switch
1 UP BUTTON
2 Display
3 DOWN BUTTON
4 SET BUTTON
5 Electrical connection/
connection cable
6 Measuring medium
7 O-ring
8 Mounting thread
2xM5
4 Pneumatically Connecting the Switch
4
The pneumatic connection uses a G1
or G2 thread. Connect suitable pipe-
lines with the appropriate connec-
tion. To connect the hex socket or
connector, hold the hexagonal part
of the pneumatic connector tight and
secure it. Use a tightening torque of
13 Nm or less.
12 / 44
2
1
4
3
8 7
EN-US · 30.30.01.02016 · 00 · 04/19
5
6