Yardworks 060-0194-4 Guide D'utilisation page 8

7
model number 060-0194-4 | contact us: 1.866.523.5218
Slide the wheel holders into the T-bar.
Line up the wheel holders to the front tires of the mower.
The multiple holes allow for adequate adjustment to fit the front tires of
the mowers.
NOTE: Inside to outside wheel pad expansion is 18 1/2–47 1/2" (47–121
cm).
T-Bar
Push Pin
Secure the wheel holders to the T-bar with the push pins. Make sure the
push pins are securely inserted into the holes.
NOTE: Wheel pads must be equal distance from the T-bar to maintain
proper balance.