Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
model number 060-0194-4 | contact us: 1.866.523.5218
TROUBLESHOOTING
Symptom
Jack will not lift load.
Jack bleeds off after lift.
Jack will not lower after
releasing the valve.
Poor lift performance.
Will not lift to full
extension.
Possible Causes
Release valve not tightly
closed.
Overload condition.
Release valve not tightly
closed.
Overload condition.
Hydraulic unit
malfunction.
Make sure you have
disengaged the parking
brake and removed the
wheel chocks.
Make sure you are
releasing the locking bar.
Fluid level low.
Air trapped in system.
Fluid level low.
Corrective Action
Ensure release valve is
tightly closed. Remedy
overload condition.
Ensure release valve is
tightly closed.
Remedy overload
condition.
Contact Customer
Service.
Contact Customer
Service.
Ensure proper fluid level.
With ram fully retracted,
remove oil filler plug to let
pressurized air escape,
reinstall oil filler plug.
Ensure proper fluid level.
19
Publicité
Table des Matières
