Yardworks 060-0194-4 Guide D'utilisation page 16

model number 060-0194-4 | contact us: 1.866.523.5218
IMPORTANT: WHEN LOWERING MUST USE
!
HANDLE TO OPERATE CYLINDER.
Preparing the mower for service.
Place wheel chocks (not included) behind the back tires of the mower and
apply the parking brake on the mower.
YOU MAY NOW SERVICE THE MOWER.
To lower the mower
1. Before lowering the lift, remove the wheel chocks and parking brake.
2. Pump handle twice or more to release pressure from locking position.
3. Keep lifting the locking bar with your one hand, at the same time, slowly
turn the cylinder release valve with the handle counter-clockwise. Only
1/2 turn is required to release the pressure. Do not overturn the release
valve.
Wheel chocks
Lift locking bar
15