Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
model number 060-0194-4 | contact us: 1.866.523.5218
IMPORTANT: The mower lift is intended for use with mowers
!
only. Do not exceed 550 lb (249 kg) front end weight. It should
never be used to service other types of machinery.
MAINTENANCE
Important: Use only a good grade hydraulic jack oil. Avoid mixing different
types of fluid and NEVER use brake fluid, turbine oil, transmission fluid,
motor oil or glycerin. Improper fluid can cause premature failure of the jack
and the potential for sudden and immediate loss of load.
HOW TO REPLACE THE HYDRAULIC CYLINDER
•
To remove the cylinder, remove the bolts
holding the cylinder in place.
•
Remove old cylinder and install new cyclinder
Using the same hardware.
ADDING OIL TO HYDRUALIC CYLINDER
•
With saddle fully lowered and pump piston
fully depressed, set jack in its upright, level
position. Remove oil filler plug.
•
Fill until oil is level with the filler plug hole,
reinstall oil filler plug.
CHANGING OIL IN HYDRUALIC CYLINDER
For best performance and longest life, replace
the complete fluid supply at least once per year.
• With saddle fully lowered and pump piston fully depressed, remove the oil
filler plug.
• Lay the jack on its side and drain the fluid into a suitable container.
17
Publicité
Table des Matières
