Turning The Unit Off - 3B P56 Mode D'emploi Rapide

Intramuscular Injection Simulator-Upper Leg
English
Error message
Failing to connect the thigh to the control unit or to place the foam core correctly on the bone (e.g. becau-
se the thigh formation is dispersed), results in an error message in the form of a triple bleep. After this, the
result indicator flashes red and green alternately.
1.2 T button / C button
You can select either the training mode or the control mode. Please press the T button for the training
mode and the C button for the control mode.
In the training mode (T button), you will immediately receive feedback as follows while
T
administering the injection:
• positive feedback (result indicator (LED green) when you have performed the injection into the
muscle correctly,
• negative feedback (result indicator (LED red) + acoustic signal) when you hit the bone.
In the control mode (C button) you will receive no feedback while performing an injection into the
C
muscle. The result will be saved and you have to press the C button again to check whether you
have carried out the intramuscular injection correctly or incorrectly. You will receive
• positive feedback (result indicator (LED green)) when you have performed the intramuscular
injection correctly,
• negative feedback (result indicator (LED red)) when you have performed the injection incorrectly.
When you hit the bone while injecting, you will immediately receive negative feedback (result
indicator (LED red) + acoustic signal).
1.3 Matrix of the result indicator
Correct injection/site
Incorrect injection/site
Not deep enough
Injection into the bone

1.4 Turning the unit OFF

The unit automatically switches off when it has not been used for a period of two minutes, or can be
manually turned off by simultaneously pressing the T button and the C button.
Result indicator
(training mode)
green
no signal
no signal
red
®
Result indicator
(control mode)
green
red
red
red