Before Initial Use; Using The Device; Igniting The Burners - Dometic StarLight Série Instructions De Montage Et De Service

Before initial use

8 Before initial use
➤ Clean the rack and the baking tray with a standard cleaning agent.
➤ Turn the oven on for 30 minutes while empty at the highest temperature.
9

Using the device

NOTE
I
 While it is operating, you will be able to hear a slight noise
caused by the gas flowing out. This is completely harmless.
 Smoke can occur when using it for the first time. This is caused
by deposits of machine oil burning and stops after approx.
10 minutes.
 The stainless steel burners turn blue from the high temperature.
This does not affect the operation or the quality of the material.
9.1

Igniting the burners

WARNING! Beware of injury
!
 Only use the device when you or another person can attend to it.
 Ignite the burner as soon as you have turned on the gas supply.
Otherwise gas can accumulate in the burner area and could
cause an explosion.
 The complete ignition process must be visible from above and
must not be hidden by pots placed on the hob.
➤ Open the main shut-off valve.
➤ Turn the control knob of the burner anti-clockwise from the neutral setting
(0) to the large flame setting.
➤ Press the control knob in and hold it in this position.
➤ Ignite the burner straight away with a match or suitable lighter. Remove
your hand quickly as soon as the burner is lit.
Once the burner is lit, you can release the knob after approx.
10 seconds.
➤ If the burner goes out after releasing the knob:
wait at least 60°seconds before you ignite it again.
16
Dometic StarLight
EN