Ibiza Light LEDBAR3-RC Manuel D'utilisation page 2

EN
IMPORTANT SAFETY INSTRUCTIONS AND DANGER WARNINGS
•
Please read these instructions carefully, they include important information about the installation, usage and
maintenance of this product.
•
Please keep this User Guide for future reference. If you sell the unit to another user, be sure that he also
receives this instruction booklet.
•
Always make sure that you are connecting to the proper voltage, and that the line voltage you are connec-
ting to is not higher than that stated on the decal or rear panel of the fixture.
•
This product is intended for indoor use only!
•
It is essential that the device is earthed. A qualified person must carry out the electric connection.
•
To prevent risk of fire or shock, do not expose fixture to rain or moisture. Make sure there are no flammable
materials close to the unit while operating.
•
The unit must be installed in a location with adequate ventilation, at least 20in (50cm) from adjacent sur-
faces. Be sure that no ventilation slots are blocked.
•
Always disconnect from power source before servicing or replacing fuse and be sure to replace with same
fuse size and type.
•
Secure fixture to fastening device using a safety chain. Never carry the fixture solely by its head. Use its
carrying handles.
•
Maximum ambient temperature (Ta) is 104° F (40°C). Do not operate the fixture at temperatures higher than
this.
•
In the event of a serious operating problem, stop using the unit immediately. Never try to repair the unit
by yourself. Repairs carried out by unskilled people can lead to damage or malfunction. Please contact the
nearest authorized technical assistance center. Always use the same type of spare parts.
•
Don't connect the device to a dimmer pack.
•
Make sure the power cord is never crimped or damaged.
•
Never disconnect the power cord by pulling or tugging on the cord.
•
Avoid direct eye exposure to the light source while it is on.
•
The product is for decorative purposes only and not suitable as a household room illumination.
•
DISCONNECT DEVICE: Where the MAINS plug or an appliance coupler is used as the disconnect device, the
disconnect device shall remain readily operable.
SPECIFICATIONS:
Ref.
Input voltage
Consumption
LED source
Beam angle
Flash rate
Fuse
Control Signal
Channel
Dimensions
Weight
2
MANUAL - LEDBAR3/6/12-RC
LEDBAR RGBW 4-IN-1
WITH DMX & REMOTE CONTROL
INSTRUCTION MANUAL
LEDBAR3-RC
24W
3 x 8W RGBW 4-in-1
0.5A
265×87×129mm
1.2kg
LEDBAR6-RC
AC100~240V 50/60Hz
48W
6 x 8W RGBW 4-in-1
25°
0-20Hz
0.5A
DMX signal
8 / 4-1 / 4 / 3 / 2 Channels
605 x 145 x 120 mm
2.5kg
LEDBAR12-RC
96W
12 x 8W RGBW 4-in-1
1A
1150 x 145 x 120mm
3.5kg