Fanox SIL A Manuel D'utilisation page 289

 Always (not recommended)
 When reporting Event Data (Slave devices only)
 When sending multi-fragment responses (Slave devices only)
 Sometimes. If 'Sometimes', when?
 Configurable as: "Only when reporting event data", or "When reporting event data or
multi-fragment messages."
Timeouts while waiting for:
Data Link Confirm
Complete Appl. Fragment  None
Application Confirm
Complete Appl. Response  None
Others Need Time Interval, configurable, default Enable
Need Restart IIN, configurable, default Disable
Unsolicited Response Retry Delay, configurable, default 2000ms
Unsolicited Offline Interval, configurable, default 3000ms
Sends/Executes Control Operations:
WRITE Binary Outputs
SELECT (3) / OPERATE (4)
DIRECT OPERATE (5)
DIRECT OPERATE - NO ACK (6)
Count > 1
Pulse On
Pulse Off
Latch On
Latch Off
Queue
Clear Queue
_______________________________________________________________________
Attach explanation:
All points support the same Function Codes :Direct Operate and Direct Operate-No ACK
All points support the same Control Codes : Pulse ON, Latch ON, Latch OFF, Pulse OFF
and Trip-Pulse ON.
www.fanox.com
None Default at 5000ms
Fixed at ____
None Default at 5000ms
Fixed at ____
 Never Always
 Never Always
Never  Always
Never
Always
 Never Always
Never
Always
Never
Always
Never
Always
Never
Always
 Never Always
 Never Always
Rev.19
Variable  Configurable
Variable Configurable
Variable  Configurable
Variable Configurable
Sometimes Configurable
Sometimes Configurable
Sometimes Configurable
Sometimes Configurable
Sometimes Configurable
Sometimes Configurable
Sometimes Configurable
Sometimes Configurable
Sometimes Configurable
Sometimes Configurable
Sometimes Configurable
289/301