Microwave Oven Control; Display; Start - Whirlpool WMC10511 Guide D'utilisation Et D'entretien

6

MICROWAVE OVEN CONTROL

Oz lbs
When power is first supplied to the microwave oven, "0:00" will
appear in the display. If the "0:00" appears in the display at any
other time, a power failure has occurred. Reset the clock if
needed. See "Clock" section.
Function Icons
A
E F
A. Microwaves D. Power (low to mid)
B. Defrost E. Time
C. Power (high) F. Control lock
The icons light up in the display while their specific functions are
being programmed. While the set function is operating, the icons
flash until the program is over. The control lock icon remains lit –
not flashing – while the control is locked.
When the microwave oven is in use, the display will show cook
time remaining, and the function icons will flash. When the
microwave oven is not in use, the display will show the time of
day (if the clock is set) or Timer countdown (if the Timer is set).
The START control begins any function. If cooking is interrupted
by opening the door, touching START will resume the cycle.
NOTE: To avoid unintentional operation of the microwave oven,
a cooking function cannot be started if the microwave oven door
has been closed for about 5 minutes. The word "door" will
appear in the display until the door is opened and closed.

Display

B C D
Oz lbs
G H I
G. Menu Program
H. Ounces
I. Pounds

Start