Technical Description; Intended Use; Safety; Serial Number Plate - Fimap FB45 Manuel D'utilisation Et D'entretien

Table des Matières

Les langues disponibles

The FB45 is an air mover device which, using a fan, creates a flow

of air heated by an electric resistance inside it, and is capable of

drying floors, carpets, etc. The device should only be used for this

purpose.

This device is designed and intended for the drying of surfaces, in

a commercial, public and industrial environments, in verified safety

conditions and by a qualified operator.

Operator cooperation is paramount for accident prevention. No

accident prevention programme can be effective without the full

co-operation of the operator who is directly responsible for machine

operation. The majority of occupational accidents that happen both

in the workplace or whilst moving are caused by failure to respect

The serial number plate is located on the rear part of the device,

indicating its general characteristics (in particular, the serial number).

The serial number is a very important piece of information and should

always be provided together with any request for assistance or when

purchasing spare parts.

TECHNICAL DATA

Power supply voltage

Frequency

Rated power

Air flow rate (max)

Head

Fan type

Fan speed

Absorbtion

Air outlet dimensions

Air flow

Power supply cable

Dimensions (length x width x height)

Weight