Set water hardness
Setup menu > set water hardness
Reset to factory settings
Setup menu > reset to factory settings
1
Prepare items as instructed. After
1 minute in water, the test strip is
coloured.
1
reset to factory se ings
yes
you will reset the
machine to its factory
se ings
no
Select "yes" to reset the machine to its
factory settings. To cancel, select "no"
or tap on "cancel" symbol.
2
water filter installation
A
a er 1 minute select the
colour of your test strip
C
Tap on "A", "B" or "C" symbol to match
the colour of your test strip. Tap on
"next" symbol to proceed.
If machine is reset to factory
i
settings, all customised settings
will be lost!
3
Adjust the bottom ring on the water
filter to "A", "B" or "C" as recommended.
EN . 23