Limitations Of Liability - Nespresso Professional Momento 100 Mode D'emploi

Machine hygiene
• Frequent automated rinsing (inter-
nally and externally) takes place
to sustain high hygiene standards
throughout the machine lifetime.
Maintenance work
• The machine must be serviced by
authorised and trained service
providers at least every 25,000
beverages per coffee head.
• A notification will appear on the
coffee machine display if the
machine needs to be serviced.
Disposal
• We recommend that you contact
Nespresso to dispose of the ma-
chine, components and packag-
ing; follow all local regulations.

Limitations of liability

• The manufacturer accepts no lia-
bility for any injuries or accidents
if the safety instructions covered in
this manual are not adhered to.
• The manufacturer cannot be held
liable for any damage caused by
misuse or inappropriate handling
of the machine.
• The manufacturer does not accept
any liability for consequences
arising from both internal and
external modifications of the
machine.
Warranty regulations
• The warranty provisions apply as
agreed with Nespresso.
• Malfunctions due to misuse or con-
necting unsuitable connections are
not covered by warranty.
• Wear and tear parts are not
covered by warranty.
• All Nespresso machines must pass
stringent controls. Reliability tests
under practical conditions are
performed randomly on selected
units. This can show traces of pre-
vious use.
Risk of material damage
• This equipment is to be installed to
comply with the applicable feder-
al, state or local plumbing codes.
• Wrong handling of the machine
can lead to property damage.
• This machine is designed for
indoor use. Keep it in such a con-
trolled environment (protected
from dust, vibrations, water splash-
es, direct sunlight, pests, etc).
• Please make sure that a Pest
Control and Monitoring system
is in place and that the machine
is located in an area with Pest
Control Monitoring.
• Position the machine on a flat,
horizontal, stable, heat-resistant
and fluid-resistant surface.
• Do not position the machine
where a water jet might be used
for cleaning.
• Machine should be placed in a
space with sufficient ventilation
around (see Machine set-up sec-
tion of this user manual for more
information).
• Store the machine in a dust-free
and dry environment, always at a
temperature above 0 °C.
• As an option, machine and
base cabinets are available in
a configuration in compliance
with the regulation on accessi-
bility by people with a disability.
Please check your local regulation
for further information.
• Never use the machine without
drip grid.
• Do not store explosive or flam-
mable substances such as aerosol
cans with a flammable propellant
inside the appliance.
• For optimal performance, the
ambient temperature must be
between 5 °C and 32 °C.
EN . 9