Makita 6924N Manuel D'instruction page 6

► 1. Notched portion 2. Bolt tip
Release the switch trigger and withdraw the tool in a
straight line.
► 1. Outer sleeve
Pull the tip ejector (tip lever) to eject the bolt tip from
the tool. Catch the sheared bolt tips to prevent them
from falling dangerously below. Keep the tips off of
the ground, floor, walkways, etc. to prevent injury from
tripping or falling.
► 1. Bolt tip
1
2
1
1
► 1. Tip ejector (Tip lever)
CAUTION:
• Washer and nut have head and tail. Head has
identification mark for nut and chamfer for
washer. When placing them, be careful not to
place in reverse.
1
► 1. Identification mark 2. Nut 3. Bolt 4. Chamfered
5. Washer
CAUTION:
• Replace nut, bolt and washer all together at one
time when these rotate together, nut rotates
excessively or a bolt protrude from nut surface
too much or less.
• Do not reuse used nut, bolt and washer.
MAINTENANCE
CAUTION:
• Always be sure that the tool is switched off and
unplugged before attempting to perform inspec-
tion or maintenance.
• Never use gasoline, benzine, thinner, alcohol
or the like. Discoloration, deformation or cracks
may result.
6 ENGLISH
1
3
2
4
5