Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
The LEDs indicate the power left in the battery.
•
When all five LEDs are lit, this gives a battery power of
approximately 100%.
•
When four LEDs are lit, this gives a battery power of
approximately 80%.
•
When three LEDs are lit, this gives a battery power of
approximately 60%.
•
When two LEDs are lit, this gives a battery power of
approximately 40%.
•
When the last LED is lit, this gives a battery power of
approximately 20%.
•
When the last LED flashes, the battery capacity is
less than 20%.
Once the battery is empty, the motor assistance is switched off,
but you do have enough battery capacity to work your lights for
quite a while. The last LED will keep flashing.
Battery standby
If you have not used your bike for an hour, the system
automatically switches to 'standby' , to save the battery.
The system is reactivated by means of the black battery
button near the rear light.
3. The battery
10
53
Publicité
Table des Matières
