Bluetooth Pairing - Numark CD MIX Guide D'utilisation

BLUETOOTH PAIRING

1. Power on your Bluetooth device.
2. Power on CDMix Bluetooth.
3. Press and hold the Pair button for 2 seconds on CDMix Bluetooth to go into Pairing Mode to search for
Bluetooth devices.
4. Go to your Bluetooth device's setup screen, find "CDMix Bluetooth," and connect to it. The Bluetooth logo in the
center of the Bluetooth Controls will illuminate when your device is paired successfully.
Note: If your Bluetooth device prompts for a pairing code, enter '0000'.
Note: If you experience trouble pairing or playing music, update your device's OS.
5. To disconnect pairing, hold down the Pair button on CDMix Bluetooth for 2 seconds. The Bluetooth logo in the
center of the Bluetooth Controls will no longer illuminate to confirm pairing is disconnected.
6. To Pair and connect to another Bluetooth device, repeat Steps 3-4.
Note: Maximum range will be achieved when using devices with Bluetooth 4.0.
CUE POINTS
Setting Cue Points:
To locate a new cue point during playback, first press the "PLAY/PAUSE" button (pausing the track) and turn the JOG
WHEEL for the CD player to repeatedly play small parts of the CD as you move to the desired position. To set the
new cue point position, press "PLAY/PAUSE" (resuming playback).
Back Cue Operation:
1. Press the "PLAY/PAUSE" button to start the disc.
2. Press the "CUE" button to return the disc to the last position (cue point) where it was started from.
Press "PLAY/PAUSE" to
start the music
NAVIGATING MP3 FOLDERS
One way to organize MP3 files on your CDs is by putting them in separate folders. Folders make it easier to quickly
find the music you want.
1. Place a MP3 CD that contains folders into one of CDMix Bluetooth's CD drives.
2. When the disc is ready, the LCD display will change from "READ" to displaying the folder name.
3. Press the FOLDER button. The LCD display will flash "FOLDER". Use the TRACK SELECT buttons to scan
through the named folders contained on the disc. Press the FOLDER button again to open a folder.
Note: The Track +10 feature is not available with a disc that contains folders.
4. Use the TRACK SELECT buttons to scan through the tracks contained within the folder. Also, press and hold
either of the TRACK SELECT buttons to rapidly scan tracks.
Note: Hold the FOLDER button and press the right-hand TRACK button to toggle between displaying the filename of
the current MP3 file or displaying the ID3 tag information.
Adjust the "CUE" point
with the JOG WHEEL
Press "CUE" to return to the
last starting point
Play interval
Play Interval
Back Cue Operation
6
Position on Disc
Position on Disc