System Requirements; Package Contents - D-Link DAP-2360 Guide D'installation

DAP-2360 Quick Install Guide
This installation guide provides basic instructions for installing the DAP-2360 Wireless
Access Point on your network. For additional information about how to use the Access
Point, please see the User's Manual which is available on the CD included in this
package or from the D-Link support website.
Minimum System Requirements:
• CD-ROM Drive
• Computers with Windows
• Installed Ethernet Adapter
• Internet Explorer version 7.0 or Firefox 3.0 and above
ƒ DAP-2360 802.11n Power over Ethernet (PoE) Access Point
ƒ Manual and Software on CD-ROM
ƒ Mounting Plate
ƒ Ethernet Cable
If any of the above items are missing, please contact your reseller.
NOTE no PSU supplied. To power the units use an D-Link PoE switch or the D-Link
DPE-101GI PoE injector.
Safety Notice:
Installation and servicing should be done by certified technicians so as to conform to all
local codes and prevent voiding your warranty.
D-Link DAP-2360 Quick Install Guide

System Requirements

, Macintosh
®

1. Package Contents

, or Linux-based operating systems
®
1