LENCO DIR-60 Mode D'emploi page 11

Sleep Timer Turn off or set the sleep timer of 15/30/60/90/120/150/180 minutes. Once the
time is set, there will be a bed icon with remaining minutes at the top right
corner and the device will turn to standby then.
Buffer Configure the buffer time of the music playback, 2/4/8 seconds.
Weather Activate/deactivate the weather forecast for the standby display. Choose your
preferred temperature unit (°F or °C) and then proceed entering your location.
When activated, the weather forecast is shown in turns with the clock display
on the standby screen (each 10 secs)
Local Radio Setup There is a shortcut Local Radio under Internet Radio so that you can easily go
to the station list of your location. You may Manual Setup your location, or let
the system Auto Detect your current location. The system detects the location
according to the IP address of your connected network. Press Local Station to
enter this local radio list directly.
FM (IR) and DAB (IR) option (listen to local FM/DAB radio channels on
Internet)
To activate the FM (IR) and DAB (IR) option, first you need to enable FM (IR)
and DAB(IR) function.
You can do this by pressing the 'menu' button, select 'Configuration' then
select 'Local Radio Setup'. Now select FM(IR) and press the 'ok' button.
Select 'Enable' and press the 'ok' button again.
Repeat the above procedure for the DAB(IR) option if you want to listen DAB
channels via Internet.
When you enabled FM(IR) and/or DAB(IR) you have to set your location.
You do this by selecting 'set location' in the 'local Radio setup' and choose
'Manual Setup (City)'. press OK to confirm.
Now you can, for example, if you are located in Berlin, select Europe and then
press the 'OK' button to confirm.
Select Germany and press the 'OK' button to confirm
Select Berlin and press the 'OK' button to confirm
Select Berlin again and press the 'OK' button.
Now there will be a prompt "Save as Local Radio", press 'OK' to finish the
settings.
Now the screen changes and you can see DAB (IR) – Berlin and FM (IR) – Berlin
on the screen. You can choose DAB radio channels by selecting
DAB(IR) – Berlin and pressing the 'OK' button. Now you will see a list of
DAB radio channels from Berlin. Select your preferred channel and press the
'OK' button to listen to it.
There will now be a DAB (IR) and FM (IR) icon on main menu screen, to quick
select another DAB or FM radio channel.
Remarks:
- If no location is set, the channel list will be empty when selecting
FM(IR) or DAB(IR).
- For FM(IR) stations you must select your CITY manually. The FM(IR)
does not work if you only select your country or let it detect
automatically.
11