BaByliss PRO EP TECHNOLOGY 5.0 Sleek Expert BAB2072RGEPE Mode D'emploi page 5

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 1
SETTINGS
TEMPERATURE
1
115°C
2
140°C
3
170°C
4
200°C
5
230°C
CURL
The design and technology of
this unit also lets you create per-
fect curls. On hair that has been
washed and dried:
1/ Take up a thin or thick section
depending on the desired result
(curl variation).
2/ Place the section on the lower
part of the unit.
3/ Close the plates of the unit on
the section.
4/ Now make a half turn under by
turning the handle, followed by
another half turn (full turn).
5/ At this stage, the section is fac-
ing you.
6/ Slide it gradually to the tips (the
'curling-ribbon' effect).
7/ Step 4 can also be carried out
by turning the unit out; you will
create a different effect.
Steps 4 and 7 may thus be alternat-
ed and complement each other
(creating an assortment of curls).
SHAIR TYPES
Fragile , dry,
bleached,
damaged
hair
Fine hair
Normal,
coloured
hair
Thick hair
Curly, ethnic
hair
5
• After use, press the ON/OFF but-
ton (0/I) and unplug the unit.
• Allow the hot unit to cool on the
heat-resistant mat provided for
this purpose.
• If the unit remains unused for
longer than about 72 minutes,
the auto shut-off will turn the
unit off; this option increases the
life of the barrels and provides
greater safety.
MAINTENANCE
• Unplug the unit and allow to cool
completely.
• Clean the plates using a soft,
damp cloth, without detergent,
to preserve the optimal quality
of the plates, do not scratch the
plates.
• Store the unit with the plates
closed against each other to pro-
tect them.

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Ep technlogy 5.0

Table des Matières