Impact Wrench; Work Area Safety; Electrical Safety; Personal Safety - Defort DCW-12 Mode D'emploi

Masquer les pouces Voir aussi pour DCW-12:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Impact Wrench

TECHNICAL DATA
2
OPERATION
GENERAL POWER TOOL SAFETY
WARNINGS
Read all safety warnings and all instructions.
Failure to follow the warnings and instructions
may result in electric shock, fi re and/or serious
injury. Save all warnings and instructions for
future reference. The term "power tool" in the
warnings refers to your mainsoperated (corded)
power tool or battery-operated (cordless) power
tool.

WORK AREA SAFETY

● Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
● Do not operate power tools in explosive atmo-
spheres, such as in the presence of fl amma-
ble liquids, gases or dust. Power tools create
sparks which may ignite the dust or fumes.
● Keep children and bystanders away while op-
erating a power tool. Distractions can cause
you to lose control.

ELECTRICAL SAFETY

● Power tool plugs must match the outlet. Nev-
er modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodifi ed plugs and matching outlets
will reduce risk of electric shock.
● Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges
and refrigerators. There is an increased risk
of electric shock if your body is earthed or
grounded.
● Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
● Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges
and moving parts. Damaged or entangled
cords increase the risk of electric shock.
1

PERSONAL SAFETY

● Stay alert, watch what you are doing and use
common sense when operating a power tool.
Do not use a power tool while you are tired or
under the infl uence of drugs, alcohol or medi-
cation. A moment of inattention while operat-
ing power tools may result in serious personal
injury.
● Use personal protective equipment. Always
wear eye protection. Protective equipment
such as dust mask, non-skid safety shoes,
hard hat, or hearing protection used for ap-
propriate conditions will reduce personal in-
juries. Prevent unintentional starting. Ensure
the switch is in the off-position before con-
necting to power source and/or battery pack,
picking up or carrying the tool. Carrying power
tools with your fi nger on the switch or energis-
ing power tools that have the switch on invites
accidents.
● Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key
left attached to a rotating part of the power
tool may result in personal injury.
● Do not overreach. Keep proper footing and
balance at all times. This enables better con-
trol of the power tool in unexpected situa-
tions.
● Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing and gloves
away from moving parts. Loose clothes, jew-
ellery or long hair can be caught in moving
parts.
POWER TOOL USE AND CARE
● Do not force the power tool. Use the correct
power tool for your application. The correct
power tool will do the job better and safer at
the rate for which it was designed.
● Do not use the power tool if the switch does
not turn it on and off. Any power tool that can-
not be controlled with the switch is dangerous
and must be repaired.
● Disconnect the plug from the power source
and/or the battery pack from the power tool
before making any adjustments, changing ac-
cessories, or storing power tools. Such pre-
ventive safety measures reduce the risk of
starting the power tool accidentally.
5

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

98291131

Table des Matières