Publicité
Les langues disponibles
Les langues disponibles
3. Press and hold the " / (4)" button to reject the call if you want. Or,
4. Press the " / (4)" button shortly to pick up the call.
5. Now you are calling with the Bluetooth speaker.
6. Press " / (4)" shortly again to hang up the call when it's finished.
The paused music will resume automatically.
Tip: speak to the "MIC (3)" direct with a distance of 30 ~ 50cm to get the
best speakerphone performance when necessary.
J. Redial For Last Call Function
1. To redial the last called number by the Bluetooth Speaker, even it is in
music playing mode.
2. Press the " / (4)" button twice to enter into the redial function;
the playing will pause and switch to the calling function for redial.
3. Press the " / (4)" button again to hang up the redial call.
4. Make sure that your mobile phone has a last dialed call; if not, the
redial for last call function cannot be activated.
K. Low Power Reminder And turn off
1. The Bluetooth Speaker will send tones out from the speaker every 10
seconds to 1 minute when the battery still has around 30 minutes
working time. When you heard this reminder, please connect the
device to the USB power for charging, if you still want to use the
device.
2. If not, the Bluetooth Speaker will power Off to the sleep mode when
the battery keeps a low energy level after 30 minutes.
L. Use AUX IN Function
a. Use AUX In under power ON mode: (Bluetooth un-paired)
1. Make sure that the external device is switched on and controlled by
the AUX output source with music playing.
2. Press and hold the "
heard to turn on the device;
3. Connect the Bluetooth Speaker's "AUX (9)" jack with an external
device's jack output through the Audio cable.
4. The mode will switch to the "AUX IN" function automatically and the
AUX IN connected device will then play.
b. Use AUX In under the Bluetooth music playing mode:
1. In Bluetooth music playing mode, connect the Bluetooth Speaker's
"AUX (9)" jack with an external device's "AUX/LINE" output through
the audio cable. The AUX IN connected device will then play.
2. In Bluetooth interconnection music playing mode, when you insert
AUX in into the main unit, both units will be disconnected from
Bluetooth. When you insert AUX in into the slave unit, the main unit is
still working. When you disconnect the Aux in, you need to reconnect
these two units again for the interconnection.
(2)" button until the "Welcome Melody" is
9
Publicité
