Operating The Product; Thermostat Setting Button; Defrost - Beko RCNE366K41XPN Manuel D'utilisation

Operating the product

5.1. Thermostat
setting button
The interior temperature of your
refrigerator changes for the following
reasons;
Seasonal temperatures,
Frequent opening of the door and
leaving the door open for long periods,
Food put into the refrigerator without
cooling down to the room temperature,
The location of the refrigerator in the
room (e.g. exposing to sunlight).
You may adjust the varying interior
temperature due to such reasons by
using the thermostat. Numbers around
the thermostat button indicates the
cooling degrees.
If the ambient temperature is higher
than 32°C, turn the thermostat button
to maximum position.
If the ambient temperature is lower
than 25°C, turn the thermostat button
to minimum position.
Refrigerator/User Manual

5.2. Defrost

Fridge compartment
Fridge compartment performs full-
automatic defrosting. Water drops and a
frosting up to 7-8 mm can occur on the
inner rear wall of the fridge compartment
while your refrigerator cools down.
Such formation is normal as a result of
the cooling system. The frost formation
is defrosted by performing automatic
defrosting with certain intervals thanks
to the automatic defrosting system of the
rear wall. User is not required to scrape
the frost or remove the water drops.
Water resulting from the defrosting
passes from the water collection groove
and flows into the evaporator through
the drain pipe and evaporates here by
itself.
Deep freezer compartment does not
perform automatic defrosting in order to
prevent decaying of the frozen food.
The freezer compartment defrosts
automatically.
Check regularly to see if the drain pipe is
clogged or not and clear it with the stick
in the hole when necessary.
15 / 23 EN