Table des Matières
Publicité
q
w
r
z x c
v b n m ,
e
t
Button Sewing
q Stitch pattern:
w Needle thread tension:
e Presser foot:
r Feed dog:
z Lower the feed dog r.
x Slide the speed control slider to the left to decrease
the sewing speed.
c Select stitch pattern 05.
Press the stitch length adjusting buttons to set the
stitch length to "0.2".
Press the stitch width adjusting buttons t to set the
stitch width according to the distance of the holes of
the button.
v Adjust the stitch width so the needle will enter the left
hole of the button.
b Turn the handwheel so that the needle will enter the
right hole of the button. Readjust the stitch width if
necessary.
n Stitch several times.
m After you finish sewing, cut the threads but leave 3˝ to
4˝ of threads at the end.
, With a hand sewing needle, draw the top thread to the
reverse side of the fabric and knot the threads.
* After the button sewing is completed, raise the feed
dogs for normal sewing.
62
05
3 to 7
Satin stitch foot F
Dropped
Publicité
Table des Matières
