Technical Details - I-VALO HITE LED Notice D'utilisation, D'installation Et De Maintenance

TECHNICAL DETAILS

Luminaire
Ta (ºC)
Input power (incl. 4 light modules + control module)
Enclosure rating (IP)
Voltage (V)
Frequency (Hz)
Mains current
Start-up
Power factor
Control
Connection
Max. number of luminaires per automatic circuit
breaker (*
Note: The values given in the table apply to standard models of the family of luminaires. We reserve the right to make changes.
*) Because component manufacturers develop their products independently, the number of luminaires may vary by control
gear model and manufacturer. Therefore, the manufacturer of the control gear should always be consulted to check the
number of luminaires. The exact number of luminaires is available from our customer service.
I-VALO OY | TEL +358 (0) 10 501 3000
HITE LED
-40°C... +110°C for light module
-25°C ... +45°C for control module
198 W
IP65
Control module 220-240 V
0/50/60 Hz
0,86A
4 x (29A 155μs) Ipeak (A) Δt @Ipeak = 50% (s)
≥0,96
DALI
Light module -o 3 x 2.5 mm
Control module -o- 5 x 2.5 mm
B10 A B16 A
3 5
| INFO@I-VALO.COM | WWW.I-VALO.COM
2
(L,N,PE,DA,DA)
2
C10 A C16 A
5 8
EN
9