Cheetah Staufenbiel Instructions De Montage page 15

4
5
6
7
8
Attach the extension cable to the string and pull
the cable through the wing.
Cover the aileron servos with heatshrink tube.
Sand the parts that will be glued lightly with 80
sandpaper.
Enlarge the outermost hole to 1.8 mm. Set the
servo to neutral and fasten the servohorn.
Connect the servo to the extension cable and
glue the servo with CA in the hole of the servo-
mount.
Align the position of the servohorn to the ruder-
horn and mark it with a felt-tipped pen.
EN
15