Cheetah Staufenbiel Instructions De Montage page 14

EN
Thanks for purchasing the Staufenbiel Cheetah.
The construction of the model and the detailed solutions related subject to a certain taste dependen-
cy. Therefore, the solutions to these instructions are to be understood as a suggestion. There are
certainly other options and approaches. In some alternatives is therefore received during the building
specifications, but does not shown on the pictures.
PLEASE READ THIS INSTRUCTIONS CAREFULLY!
1
2
3
14
PREFACE
THE WINGS
Use a hobby knife with #11 Blade to cut the
covering from the area above the aileron servo
mounting position.
Use a soldering iron to open the holes for the
center pins and the servo cable.
Prepare two 50cm Sevo extension cable and
two with 10cm lenght that will be left in the fu-
selage and make the completion easier.