Check The Installation; Removal; Customer Service - Gaggenau BMP250710 Notice De Montage

Screw the appliance into place.
5.

Check the Installation

9
WARNING
Before you connect an electrical cord for
permanent connection or turn on power supply,
make sure all controls are in the OFF position.
9
AVERTISSEMENT
Avant de brancher un cordon électrique pour un
raccordement permanent ou de mettre sous
tension la source d'alimentation, vérifiez que
toutes les commandes sont à la position OFF
(Arrêt).
Switch on the circuit breaker.
Verify that elements function properly.

Removal

1. Disconnect the appliance from the power supply.
Undo the fastening screws.
2.
3. Raise the appliance slightly and pull it out completely.

Customer Service

If your appliance needs repairs, our Customer Service is
there for you. We work hard to help solve problems
quickly and without unnecessary service calls, getting
your appliance back up and running correctly in the least
amount of time possible.
When you call, please indicate the product number
(E-Nr.) and serial number (FD-Nr.) so that we can support
you in a qualified manner. You will find the type plate with
these numbers at the inside of the appliance door. To
avoid having to search for the information when you need
it, you can enter your appliance data and the customer
support telephone number here.
E-Nr.
Customer Service O
Please read the use and care manual provided with your
appliance. Failure to do so may result in an error in using
the appliance. This could result in a service call that
instead of fixing a mechanical issue is only needed for
customer education. Such calls are not covered by the
appliance warranty.
Please find the contact data of all countries in the
enclosed customer service list.
To book a service visit and product advice
USA 877 442 4436
toll-free
CANADA 877 442 4436
toll-free
Preparing Kitchen Units
FD-Nr.
en-us
13